G54 PRIMER

PRIMER FOR GYPSUM BOARDS

G54 PRIMER is a high-quality acrylic waterborne primer for interior use, suitable for gypsum boards and other absorbent surfaces made of plaster, putty, etc. Due to its excellent filling properties, it perfectly balances the absorbency between the leveled with stucco surfaces and the gypsum board, ensuring a flawless end result. It has high whiteness, excellent coverage and strong adhesion. It has very good application properties, levelling and spreading rate and it dries fast. Gives surface, for high quality finishes. It is practically odorless.

exceptional filling properties
cover imperfections
fully equalizes absorbency

BUILDINGS – INTERIOR USE

matt

Finish

TOOLS

THINNING

1-2 hr

DRYING TIME

2-4 hrs

OVERCOATING INTERVAL

RECOMMENDED COATS

12
m²/L

SPREADING RATES

Preparation

Carefully prepare surface to obtain good results. Remove all weathered-peeled off coatings, dust, oils, salts and mildew. Surface must be clean and dry.

Putty any surface defects.

Prime locally with G54 PRIMER. Apply G54 PRIMER on the entire surface.

Use

Roller, brush or spray airless. Thin by 5-10% with water.

► Stir well before use and during application.
► For application with a roller or a brush, apply one or two coats thinned with water by 5-10%. For application with an airless spray gun, thin with water by 10-15%.